DriveTite Cable Kit


Installation Guide


DriveTite Installation Guide



The DriveTite Kit contains everything you need to be able to tension one end of a run of cable inside a wood post at either an angle or on a level.*

DriveTite Includes:

  • Cable Threaded Crimp Fitting
  • DriveTite Cover
  • DriveTite Lock Washer
  • DriveTite Receiver
  • DriveTite Receiver Screw
  • DriveTite Turn Buckle

These components are crafted from marine-grade 316 stainless steel and aluminum for lasting beauty and strength. We recommend putting a cable every 3 1/8″ as we’ve found that this spacing (when combined with an intermediate post placed every 4 feet), allows for minimal cable deflection, ensuring that you stay within the common 4″ sphere rule for code compliance. If your overall system height is 36″ tall, typically a 10 pack for each post is required (depending on your handrail setup, it might be less). For 39″ systems purchase a 11 pack, and for 42″ systems purchase a 12 pack.

*You will need to purchase a kit for the other end of your cable, either another DriveTite Kit, a Wood Level Tension Kit, or a Wood Angle Tension Kit (for starting or ending on a staircase). We highly recommend using our DriveTite Installation Kit to install this product.

Product Information

Weight 2 lbs
Dimensions 4 × 4 × 2 in

Your cart is empty. Add a few items to your cart to begin.

Browse Products
Load Saved Cart
DIY Cable Railing DIY Cable Railing
Glass Railing Glass Railing