Wood Angle Tension Kit – VR299

Clear
Ships in approx: 2 Business Days

Description

The Wood Angle Tension Kit contains everything you need to be able to tension one end of a run of cable at an angle.*

1 – Tension Receiver (VR305)
1 – Threaded Crimp Fitting (VR306)
1 – Angle Washer (VR345) [Select the angle that matches your stairs]
1 – Wood Angle Insert (VR336)
1 – Oval Washer (VR342)

These components are crafted from marine-grade 2205 duplex stainless steel for lasting beauty and strength. We recommend putting a cable every 3 1/8″, we’ve found that this spacing (when combined with an intermediate post placed every 4 feet), allows for minimal cable deflection, so that you stay within the common 4″ sphere rule for code. If your overall system height is 36″ tall, typically a 10 pack for each post is required (depending on your handrail setup, it might be less). For 39″ systems purchase a 11 pack, and for 42″ systems purchase a 12 pack.

*You will need to purchase a kit for the other end of your cable, either another Wood Level Tension Kit, a Wood Angle Tension Kit (for starting or ending on a staircase), or a DriveTite Kit. We highly recommend using our Cable Rail Tool Kit (VR400) to install this product.

Additional information

WeightN/A
DimensionsN/A

Your cart is empty. Add a few items to your cart to begin.

Browse Products
Load Saved Cart
Memorial Day Sale, All Floating Stairs and Railing On Sale
CloseOpen